Followers

Powered by Blogger.
Thursday, 13 September 2012

Engine sludge build up killed my engine!

Engine Sludge build up: The Black Death of sad engines!

Image from: www.tunemytoyota.com
Engine sludge build up used to be better (Or more sensationally) known as “Black Death”; probably accurately describing the appearance an effect it has on an engine, if not rectified in time.

Basically what happens is the oil oxidises and becomes contaminated to the point where it thickens to form a sludge and changes colour. The high viscosity, in turn, leads to the oil pump not being able to pick up this sludge from the oil pan; causing oil starvation.

What causes engine sludge build up?

Wednesday, 5 September 2012

Selecting a chain lubricant that works!

How to select the best chain lubricant for the application.

Chain drives have long been accepted as amongst the most efficient, but have always suffered from being exposed to harsh operating conditions which in turn have made to job of the chain lubricant almost impossible. This makes selecting the correct chain lubricant vital to life of the chain.

The almost impossible task of delivering chain lubricant to the right place!

The objective with chain lubrication
Saturday, 1 September 2012

How to select the right heat transfer fluid.

Where do you start in selecting the right heat transfer fluid?

Heat transfer fluids are far more efficient at heating or cooling equipment than air cooling. Because of this, most high performance machines use some form of fluid heating or cooling, resulting in a plethora of different heat transfer fluids to choose from.

Selecting the correct high temperature heat transfer fluid.

The process of selecting the optimum heat transfer fluid
Wednesday, 22 August 2012

Selecting Hydraulic fluid with the correct viscosity?

Selecting hydraulic fluid with the correct viscosity is the single most important factor for optimum performance.

Why is so much spoken about selecting hydraulic fluid with the correct viscosity? Well there are many properties that additives fortify for a specific application; but no one specification is as important as choosing the right hydraulic fluid viscosity that’s suitable over the entire operating temperature range.

Not selecting hydraulic fluid with the correct viscosity has these implications:

Fluid viscosity is one of the
Wednesday, 15 August 2012

The Disadvantages In Using Biodegradable Lubricants.

What are disadvantages in using biodegradable lubricants when compared to “normal oils”?

This week we’re looking at the disadvantages in using biodegradable lubricants. Even though there’s a very strong case to made in favor of biodegradable lubricants, they can only come into their own if the disadvantages in using biodegradable oils are fully understood.

What are the common groups of biodegradable oils?

In order to understand where the disadvantages in
Friday, 10 August 2012

Why Biodegradable Lubricants Should Be Considered?

Biodegradble lubricants should be considered where there’s a high risk of environmental damage

Biodegradble lubricants should be considered when you realise that approximately 2.5 billion gallons of lubricants are sold annually in North America alone. Several studies show that approximately 60 percent of this oil is not accounted for and ends up in ground water, rivers, lakes and on the ground itself, causing untold harm to the environment.

Marine, forestry and agriculture industries in particular, along with citizen groups and
Wednesday, 1 August 2012

Flushing a Turbine Oil System

Flushing a turbine oil system is a specialised procedure best carried out by specialists.

When flushing a turbine oil system it’s always advisable to bear in mind the value of the equipment, and not take any short cuts; or skimp on costs!

Up-front planning and meetings with construction, start-up, oil supplier and the end user should be scheduled in advance to build consensus on the turbine flushing procedures.

Conduct this test prior to