Followers

Powered by Blogger.
Friday 11 December 2015

What is a Motor Oil viscosity index modifier?

The engine oil viscosity index modifier is vital in modern oil.

The first engine oil viscosity index modifier was developed to overcome issues of changing operating temperatures: In the early days they were simply identified as motor oil additives.

With the introduction of the engine oil viscosity index modifier in the 1960s, it became possible to formulate engine oils with good viscosity at high temperatures whilst flowing more easily at low temperatures than conventional mono-grade oils. The result was that the
oil’s viscosity could be maintained within acceptable limits in both hot and cold climates.

What is an engine oil viscosity index modifier?

(VI) is a popular technique of calibrating a fluid's change of viscosity with regards to temperature. The greater the VI, the lesser the relative change in viscosity with temperature. Motor oil VI improvers (also called engine oil viscosity index modifier) are additives that improve the viscosity of the fluid all through its useful temperature range.

An engine oil viscosity index modifier is a polymeric molecules that is sensitive to temperature. At low temperatures, the molecule chain shrinks and does not effect the fluid viscosity. Whilst at higher temperatures, the chain unwinds and the viscosity increases.

A good analogy is to think about this chain as a slinky, a lazy-spring coil-shaped toy. When shortened, the molecules (Spring) effortlessly flow past each other, but when expanded, they get trapped on each other and slow down the movement of the fluid they occupy.

There are two approaches to describe the properties of these types of polymer chains. The very first is to compare the polymers to people. Whenever a person is cold, his normal response is to keep his arms close to his body to maintain heat. Now picture a group of cold people, arms drawn in, moving past each other in a busy passageway. For certain there's some over-crowding however the people can continue to move unhampered.

Now picture the contrary. Whenever a person is hot, he is likely to sprawl out. Imagine a person keeping his arms straight out from his sides. It would certainly be a lot more challenging to get around a busy passageway full of hot people, arms extended. Consider in this example, the movement of people is related to the viscosity of the group.

Bear in mind that as temperature raises, the viscosity reduces. The inclusion of an engine oil viscosity index modifier is only going to decrease the rate at which the viscosity reduces.

Why do we need an engine oil viscosity index modifier?

An engine oil viscosity index modifier is mainly used in multigrade engine oils, gear oils, automatic transmission fluids, power steering fluids, greases and different hydraulic fluids. Many of these uses are targeted at vehicles, and this really is due to the fact cars are exposed to huge temperature shifts. 


For example, in the crankcase, an oil with a lower viscosity at low temperature is required so the oil pump can drive the oil to the top of the engine during those chilly morning starts. The oil also has to be viscous enough to safeguard the engine when it gets to working temperature. This is where the use of modifiers in multigrade oil is advantageous.

Drawbacks of using an engine oil viscosity index modifier.

Regrettably, an engine oil viscosity index modifier will have a few disadvantages. The main drawback is it’s prone to mechanical shearing. When referring to the slinky analogy, it is easy to picture a stretched-out slinky cut in half by mechanical processes to create two smaller slinkys.

As the additive is consistently sheared, it will lose its capability to behave as a far more viscous fluid at increased temperatures. Greater molecular weight polymers create much better thickeners but have a tendency to have significantly less resistance to mechanical shear. Reduced molecular weight polymers are more shear-resistant, but do not enhance viscosity as efficiently at higher temperatures and, as a result, must be applied in greater amounts.

Though initially  only recognized as an additive, the engine oil viscosity index modifier has become part and parcel of engineered motor oils that fulfill ever changing needs. Contact the professionals at Habot Oil for more information.

0 comments: