Followers

Powered by Blogger.
Monday 14 December 2015

The importance of oil additives in motor oil.

Find out about the importance of oil additives in motor oil.




Whenever oil performance is discussed the importance of oil additives in motor oil usually takes backseat to oil viscosity as the main focus. This is usually due to a lack of understanding of the true role of oil additives in blending a quality engine oil.

Appreciate the importance of oil additives in motor oil by understanding the additives.

Additives are organic or inorganic compounds dissolved or suspended as solids in oil. They typically make up between 0.1 to 30 percent of the oil volume, depending on the application. So now you can begin to understand the importance of oil additives in motor oil.
Additives have three basic roles:

  1. Enhance existing base oil performance with antioxidants, corrosion inhibitors, anti-foam agents and demulsifying agents. 
  2. Reduce undesirable base oil properties with pour-point depressants and viscosity index (VI) modifiers. 
  3. Enhance base oils with extreme pressure (EP) additives, detergents, metal deactivators and tackiness agents, for specific applications.

The importance of oil additives in motor oil is determined by the following additives?

Polar Additives

In simple terms, this is anything that water dissolves or dissolves into water. A sponge, a metal surface, dirt, water and wood pulp are all polar. Things that are not polar include wax, Teflon, mineral base stock, a duck’s back and water repellents.

It’s important to note that additives are sacrificial. Once they are gone, they’re gone. If contaminants that additives are attracted to are allowed into the system, the additives will cling to the contaminants and settle to the bottom or will be filtered out and deplete the additive package.

To understand the importance of oil additives in motor oil it’s important to understand that the depletion of these is one of the reasons why it’s important to change engine oil at the correct interval.

Polar Mechanisms 

There are a few polar mechanisms such as particle enveloping, water emulsifying and metal wetting that are worthy of discussion.

Particle enveloping means that the additive will cling to the particle surface and envelop it. These additives are metal deactivators, detergents and dispersants. They are used to disperse soot particles and prevent settling and deposits, especially at low to moderate temperatures. You’ll often see this in engines where this principle is used to control soot in engine oil

There is an optimum dosing point: As more additive is blended into the oil, sometimes there isn’t any more benefit gained, and at times the performance actually deteriorates.

In addition, increasing the percentage of a certain additive may improve one property of an oil while at the same time degrade another. When the specified concentrations of additives become unbalanced, the importance of oil additives in motor oil is reduced.

Common additives that boost the importance of oil additives in motor oil?

Emulsifying agents work by fixing themselves to micro-droplets of moisture. In so doing, the additive is depleted.

Metal wetting is when additives anchor to metal surfaces, which is what they are supposed to do. They attach to the interior of the gear casing, gear teeth, bearings, shafts, etc. Additives that perform this function are rust inhibitors, anti-wear (AW) and EP additives, oiliness agents and corrosion inhibitors.

AW additives work specifically to protect metal surfaces during boundary conditions. They form a ductile, ash-like film at moderate to high contact temperatures . Under boundary conditions, AW film shears instead of surface material.

One common anti-wear additive, zinc dialkyldithiophosphate (ZDDP) has pretty much been removed, because it affects the catalytic converter on modern cars.. It reduces the risk of metal-to-metal contact, which can lead to increased heat, result in oxidation and negatively affect the film strength. Modern synthetic engine oils have high shear strength, which coupled to modern engine design no longer requires ZDDP.

Additive packages can be tailored to suite operating conditions which base oils could never achieve. Hence the importance of oil additives in motor oil. At Habot Oil our team of professionals can assist you in selecting the best Habot Oil product for your application.

1 comments:

AlisaJankovic said...

Wow! I have never thought much about bitron oil additive that before. I personally use products from Smith Lubricants used to improve the efficiency and economy of the petrol and diesel.