Followers

Powered by Blogger.
Friday 10 October 2014

3 Reasons to use 0W-20 synthetic motor oil.

3 very good reasons to use 0W-20 synthetic motor oil.

In a time when most people are coming to terms with synthetic engine lubricants manufacturers have found 3 reasons to use 0W-20 synthetic motor oil: And it’s worth listening to them! Well, it’s mostly legislation that has highlighted these reasons to use 0W-20 synthetic motor oil.

Lower vehicle emissions and fuel consumption are the most important reasons to use 0W-20 synthetic motor oil.

It’s a well known fact that motor vehicles around the world are the highest consumer of fossil fuel – crude oil. And there’s a direct correlation between the burning of fossil fuel and the formation of green house gasses. So the more fuel a car consumes the more carbon dioxide it pumps into the atmosphere; and this CO2 hangs around in the atmosphere for up to 700 years.

In order to reduce frictional losses is one of the prime reasons to use 0W-20 synthetic motor oil. By so doing engines are more efficient and therefore use less fuel. This improved consumption, through using 0W-20 synthetic engine oil therefore reduces the amount of CO2 gas emitted.

Manufacturers see reduced engine wear as one of the important reasons to use 0W-20 synthetic motor oil.

The highest wear on engine parts takes place when the engine is fired up from cold. This is largely due to the fact that the cold oil is thick and therefore takes a little while to reach high wear components, such as the valve gear.

The “0” in the 0W-20 indicates that the engine lubricant acts as though it has 0 viscosity when cold: This means that when cold the oil is relatively thin and reaches all areas of the engine much quicker, thereby reducing engine wear. Reduced engine wear equates to a cost saving over time is definitely one of the more attractive reasons to use 0W-20 synthetic motor oil. Another of the reasons to use 0W-20 synthetic motor oil is extended oil life.

One of the advantages to using fully synthetic 0W/20 engine lubricant is the synthetics ability to withstand oxidation at higher operating temperatures. This engineered quality means that the oil has an extended life thereby increasing services intervals. This extended oil life is definitely another of the 3 reasons to use 0W-20 synthetic motor oil.

Although there are several other reasons to use 0W-20 synthetic motor oil, these 3 are the ones that manufacturers highlight, as well as being very pertinent to everyday motoring. The other fact that all manufacturers agree upon is that you should only use high quality, full synthetic 0W20 synthetic motor oil: such as that produced by Habot Oil. Not only do we produce quality 0W-20 fully synthetic motor oil, but we offer professional advice on any matter related to lubrication.

0 comments: